Stainless Steel Perforated Corrugated Packing
1. Product Description:
Metal perforated corrugated packing is composed of several corrugated metal sheets arranged parallel and vertically. Small holes are punched on the corrugated sheets, with a corrugation apex angle of about 90°. The channels formed by the corrugations make an angle of 45° or 30° with the vertical direction. The flow channels of two adjacent corrugated sheets form 90°, and two adjacent packing discs are stacked with a 90° rotation. In towers of small diameter connected by flanges, the corrugated packing is made into complete discs with a diameter slightly smaller than the inner diameter of the tower. In towers of larger diameter, each packing disc is divided into several pieces, which are brought into the tower through manholes and assembled into complete discs inside; adjacent discs are installed with a 90° rotation of the corrugated sheets to fully mix the fluid in the tower.
2. Performance Introduction:
Metal perforated corrugated packing is stamped from various metal sheets 0.15-0.20 mm thick. The sheets are punched with φ4 mm holes and several fine slits about 5 mm long, enhancing wettability and allowing bidirectional flow; the open area ratio is about 9-12%. The perforated sheet surface has a special texture to increase the effective mass transfer area. Its separation capability is similar to wire gauze corrugated packing, but its anti-blocking ability is stronger than corrugated packing.
3. Technical Parameters:
| Type | Peak Height (mm) | Specific Surface Area (m²/m³) | Theoretical Plates (1/m) | Voidage (%) | Pressure Drop (MPa/m) | F Factor |
|---|---|---|---|---|---|---|
| QX125 | 24 | 125 | 1-1.2 | 98.5 | 1.5×10<sup>-4</sup> | 3 |
| QX250 | 12 | 250 | 2-3 | 97 | 1.5-2×10<sup>-4</sup> | 2.6 |
| QX350 | 8 | 350 | 3.5-4 | 95 | 1.5×10<sup>-4</sup> | 2 |
| QX450 | 6.5 | 450 | 4-4.5 | 93 | 1.8×10<sup>-4</sup> | 1.5 |