PTFE Pall Ring
1. Product Description:
PTFE Pall rings feature low pressure drop, high throughput, high efficiency and good liquid distribution. The newly developed reinforced Pall rings can withstand high temperatures up to 250°C without deformation while ensuring smooth passage of gas and liquid media.
2. Performance Introduction:
The PTFE Pall ring is a new type of packing developed to overcome the main shortcomings of Raschig rings. Six layers of rectangular windows are cut into the wall of an ordinary Raschig ring, with the window blades overlapping at the center of the ring and the windows of upper and lower layers interlaced. The main difference from Raschig ring packing is the rectangular window openings on the side wall, with the window blades bent inward toward the ring center. Because the ring wall is perforated, the gas and liquid distribution performance is greatly improved compared with Raschig rings, and the internal surface area of the ring can be fully utilized.
3. Technical Parameters:
4. Technical Characteristics:
High-temperature resistance — working temperature up to 160°C.
High separation efficiency — large throughput, low resistance, high separation efficiency and wide operating flexibility. Under the same pressure drop, the treatment capacity is over 50% higher than Raschig rings; at the same throughput, the pressure drop can be halved and mass transfer efficiency can be improved by about 20%.
Low-temperature resistance — even at temperatures as low as -196°C, 5% elongation can be maintained.
Corrosion resistance — inert to most chemicals and solvents, resistant to strong acids, alkalis, water and various solvents.
Weather resistance — good aging life among plastic materials.
Non-toxic — biologically inert.
5. Applications:
In chemical engineering, PTFE Pall rings function as gas-liquid contact surfaces that promote intensive mixing between the two phases. Suitable for various separation, absorption and desorption units, atmospheric and vacuum units, ammonia synthesis decarbonization, desulfurization systems and more.
| No. | Specification (mm) | Bulk Density (kg/m³) | Packing Count (n/m³) | Specific Surface Area (m²/m³) | Voidage (%) |
|---|---|---|---|---|---|
| 1 | 20×20×2 | 522 | 110000 | 267 | 0.928 |
| 2 | 25×25×2 | 423 | 56000 | 219 | 0.934 |
| 3 | 38×38×3 | 368 | 14000 | 165 | 0.946 |
| 4 | 50×50×4 | 390 | 6500 | 113.5 | 0.949 |
| 5 | 65×65×4 | 480 | 4600 | 84 | 0.948 |
| 6 | 76×76×5 | 328 | 1850 | 73 | 0.92 |