Stainless Steel Perforated Corrugated Packing

Stainless Steel Perforated Corrugated Packing

1. Product Description:
Metal perforated corrugated packing is composed of several corrugated metal sheets arranged parallel and vertically. Small holes are punched on the corrugated sheets, with a corrugation apex angle of about 90°. The channels formed by the corrugations make an angle of 45° or 30° with the vertical direction. The flow channels of two adjacent corrugated sheets form 90°, and two adjacent packing discs are stacked with a 90° rotation. In towers of small diameter connected by flanges, the corrugated packing is made into complete discs with a diameter slightly smaller than the inner diameter of the tower. In towers of larger diameter, each packing disc is divided into several pieces, which are brought into the tower through manholes and assembled into complete discs inside; adjacent discs are installed with a 90° rotation of the corrugated sheets to fully mix the fluid in the tower.

2. Performance Introduction:
Metal perforated corrugated packing is stamped from various metal sheets 0.15-0.20 mm thick. The sheets are punched with φ4 mm holes and several fine slits about 5 mm long, enhancing wettability and allowing bidirectional flow; the open area ratio is about 9-12%. The perforated sheet surface has a special texture to increase the effective mass transfer area. Its separation capability is similar to wire gauze corrugated packing, but its anti-blocking ability is stronger than corrugated packing.

3. Technical Parameters:

Stainless Steel Perforated Corrugated Packing

Stainless Steel Perforated Corrugated Packing

1. Product Description:
Metal perforated corrugated packing is composed of several corrugated metal sheets arranged parallel and vertically. Small holes are punched on the corrugated sheets, with a corrugation apex angle of about 90°. The channels formed by the corrugations make an angle of 45° or 30° with the vertical direction. The flow channels of two adjacent corrugated sheets form 90°, and two adjacent packing discs are stacked with a 90° rotation. In towers of small diameter connected by flanges, the corrugated packing is made into complete discs with a diameter slightly smaller than the inner diameter of the tower. In towers of larger diameter, each packing disc is divided into several pieces, which are brought into the tower through manholes and assembled into complete discs inside; adjacent discs are installed with a 90° rotation of the corrugated sheets to fully mix the fluid in the tower.

2. Performance Introduction:
Metal perforated corrugated packing is stamped from various metal sheets 0.15-0.20 mm thick. The sheets are punched with φ4 mm holes and several fine slits about 5 mm long, enhancing wettability and allowing bidirectional flow; the open area ratio is about 9-12%. The perforated sheet surface has a special texture to increase the effective mass transfer area. Its separation capability is similar to wire gauze corrugated packing, but its anti-blocking ability is stronger than corrugated packing.

3. Technical Parameters:


Type Peak Height (mm) Specific Surface Area (m²/m³) Theoretical Plates (1/m) Voidage (%) Pressure Drop (MPa/m) F Factor
QX125 24 125 1-1.2 98.5 1.5×10<sup>-4</sup> 3
QX250 12 250 2-3 97 1.5-2×10<sup>-4</sup> 2.6
QX350 8 350 3.5-4 95 1.5×10<sup>-4</sup> 2
QX450 6.5 450 4-4.5 93 1.8×10<sup>-4</sup> 1.5

Key Features

Technical Specifications

Case Study

We believe the projects that we have executed speak for themselves. CITIC HIC has engineered and provided 6 AG mills of Ø12.2m×11m (28000kW gearless drive) and 6 overflow discharge ball mills of Ø7.9×13.6m (2×9000kW gear drive) for Sino Iron Project in Australia. For Zijin Mining’s Duobaoshan Copper Mine project in Heilongjiang, we have manufactured and provided SAG mills of Ø11×6.4m (2×9000kW) and overflow discharge ball mills of Ø7.9×13.6m (2×9000kW) which have been well operating currently.

Full-process Solution for Mineral Grinding

We believe the projects that we have executed speak for themselves. CITIC HIC has engineered and provided 6 AG mills of Ø12.2m×11m (28000kW gearless drive) and 6 overflow discharge ball mills of Ø7.9×13.6m (2×9000kW gear drive) for Sino Iron Project in Australia. For Zijin Mining’s Duobaoshan Copper Mine project in Heilongjiang, we have manufactured and provided SAG mills of Ø11×6.4m (2×9000kW) and overflow discharge ball mills of Ø7.9×13.6m (2×9000kW) which have been well operating currently.

Why Choose CITIC HIC's Grinding Mills
  • High cost-effectiveness
    CITIC HIC grinding mills are recognized as China’s Manufacturing Industry Single Champion Product. CITIC HIC is responsible for setting the national standards of semi-autogenous mills (SAG mills) and ball mils, supported by powerful database, optimized process technology, cutting-edge design concept, and 60 years of experience in developing and nurturing innovative technology.
  • High operating rate
    The long life cycle of our products is based on the adoption of international standards, high-quality materials, state-of-the-art processing techniques.
  • Low-carbon & environmental-friendly processes
    Intelligent control technology coupled with long-life wear-resistant materials results in low-carbon and eco-friendly operations.
  • High-efficiency service
    Our service network is distributed all over the world, and our service team of seasoned professionals is reliable and willing to assist along the way. We are able to deliver quick response to customer needs and provide full life cycle support via online monitoring and diagnosing, product upgrading and continuous process improvement.

Do you have any questions?

Other Products

Scroll to Top