Q-PAC Packing

Q-PAC Packing

Q-PAC ring packing (also called Q-Pak or Ball-Pak packing), also known as the “three-plus-one” high-efficiency plastic packing for scrubbers, is regarded in the industry as a cost-effective packing. Its drip-point design and turbulent gas flow structure create tens of thousands of fine droplets, exponentially increasing the gas-liquid contact area while gas flows through with minimal resistance. Q-PAC provides efficient mass transfer with extremely low pressure drop, delivering excellent mass transfer efficiency at lower initial, operating and maintenance costs. It has achieved remarkable results in packed towers such as wet scrubbers and stripping towers, with the following advantages:

1. Innovative drip-point design greatly increases the effective gas/liquid contact area; allows smaller tower diameter, lower initial cost and a smaller system footprint; the reduced demisting layer also means lower equipment investment.

2. Lower pressure drop requires less fan energy, saving energy costs; 30-50% higher treatment capacity; resistant to structural blockage with good anti-scaling capability. The uniformly spaced rod design, smooth profile and high voidage provide a self-cleaning function that minimizes blockage, meaning fewer maintenance operations.

3. Allows higher superficial gas velocity design, resulting in smaller tower diameter and footprint.

4. High mass transfer efficiency, requiring lower packing height to achieve the same efficiency.

5. High voidage and low pressure drop reduce fan energy consumption.

6. Good anti-scaling and anti-blocking characteristics.

7. Packing rings do not nest or interlock after operation, without loss of efficiency or short-circuiting.

The “three-plus-one” combination of Q-PAC is a high-efficiency packing suitable for large scrubbers, gas absorbers and gas cooling towers. Its low pressure drop (approximately 0.7 in. H2O per foot of packing) opens new possibilities in packed tower design. Its flow structure uses drip points and gas turbulence to create countless droplets, exponentially increasing gas-liquid contact area with minimal restriction to gas flow. Its voidage is as high as 96.3%, and its directionally consistent spatial network allows fine solid particles to pass through without clogging. These advantages in scrubbing efficiency, airflow capacity and anti-blocking performance are unmatched by other packings worldwide.

Q-PAC Packing

Q-PAC Packing

Q-PAC ring packing (also called Q-Pak or Ball-Pak packing), also known as the “three-plus-one” high-efficiency plastic packing for scrubbers, is regarded in the industry as a cost-effective packing. Its drip-point design and turbulent gas flow structure create tens of thousands of fine droplets, exponentially increasing the gas-liquid contact area while gas flows through with minimal resistance. Q-PAC provides efficient mass transfer with extremely low pressure drop, delivering excellent mass transfer efficiency at lower initial, operating and maintenance costs. It has achieved remarkable results in packed towers such as wet scrubbers and stripping towers, with the following advantages:

1. Innovative drip-point design greatly increases the effective gas/liquid contact area; allows smaller tower diameter, lower initial cost and a smaller system footprint; the reduced demisting layer also means lower equipment investment.

2. Lower pressure drop requires less fan energy, saving energy costs; 30-50% higher treatment capacity; resistant to structural blockage with good anti-scaling capability. The uniformly spaced rod design, smooth profile and high voidage provide a self-cleaning function that minimizes blockage, meaning fewer maintenance operations.

3. Allows higher superficial gas velocity design, resulting in smaller tower diameter and footprint.

4. High mass transfer efficiency, requiring lower packing height to achieve the same efficiency.

5. High voidage and low pressure drop reduce fan energy consumption.

6. Good anti-scaling and anti-blocking characteristics.

7. Packing rings do not nest or interlock after operation, without loss of efficiency or short-circuiting.

The “three-plus-one” combination of Q-PAC is a high-efficiency packing suitable for large scrubbers, gas absorbers and gas cooling towers. Its low pressure drop (approximately 0.7 in. H2O per foot of packing) opens new possibilities in packed tower design. Its flow structure uses drip points and gas turbulence to create countless droplets, exponentially increasing gas-liquid contact area with minimal restriction to gas flow. Its voidage is as high as 96.3%, and its directionally consistent spatial network allows fine solid particles to pass through without clogging. These advantages in scrubbing efficiency, airflow capacity and anti-blocking performance are unmatched by other packings worldwide.


Key Features

Our crushers have been exported to a number of countries such as Sweden and Brazil, and widely used in coarse crushing operations of iron ores, copper ores, gold ores and molybdenum ores. Numerous projects that we have successfully executed are the evidence of our ability to provide safe, reliable, energy-saving and high-efficiency crushing equipment solutions.Our crushers have been exported to a number of countries such as Sweden and Brazil, and widely used in coarse crushing operations of iron ores, copper ores, gold ores and molybdenum ores. Numerous projects that we have successfully executed are the evidence of our ability to provide safe, reliable, energy-saving and high-efficiency crushing equipment solutions.

Technical Specifications

Our crushers have been exported to a number of countries such as Sweden and Brazil, and widely used in coarse crushing operations of iron ores, copper ores, gold ores and molybdenum ores. Numerous projects that we have successfully executed are the evidence of our ability to provide safe, reliable, energy-saving and high-efficiency crushing equipment solutions.

Case Study

We believe the projects that we have executed speak for themselves. CITIC HIC has engineered and provided 6 AG mills of Ø12.2m×11m (28000kW gearless drive) and 6 overflow discharge ball mills of Ø7.9×13.6m (2×9000kW gear drive) for Sino Iron Project in Australia. For Zijin Mining’s Duobaoshan Copper Mine project in Heilongjiang, we have manufactured and provided SAG mills of Ø11×6.4m (2×9000kW) and overflow discharge ball mills of Ø7.9×13.6m (2×9000kW) which have been well operating currently.

Full-process Solution for Mineral Grinding

We believe the projects that we have executed speak for themselves. CITIC HIC has engineered and provided 6 AG mills of Ø12.2m×11m (28000kW gearless drive) and 6 overflow discharge ball mills of Ø7.9×13.6m (2×9000kW gear drive) for Sino Iron Project in Australia. For Zijin Mining’s Duobaoshan Copper Mine project in Heilongjiang, we have manufactured and provided SAG mills of Ø11×6.4m (2×9000kW) and overflow discharge ball mills of Ø7.9×13.6m (2×9000kW) which have been well operating currently.

Why Choose CITIC HIC's Grinding Mills
  • High cost-effectiveness
    CITIC HIC grinding mills are recognized as China’s Manufacturing Industry Single Champion Product. CITIC HIC is responsible for setting the national standards of semi-autogenous mills (SAG mills) and ball mils, supported by powerful database, optimized process technology, cutting-edge design concept, and 60 years of experience in developing and nurturing innovative technology.
  • High operating rate
    The long life cycle of our products is based on the adoption of international standards, high-quality materials, state-of-the-art processing techniques.
  • Low-carbon & environmental-friendly processes
    Intelligent control technology coupled with long-life wear-resistant materials results in low-carbon and eco-friendly operations.
  • High-efficiency service
    Our service network is distributed all over the world, and our service team of seasoned professionals is reliable and willing to assist along the way. We are able to deliver quick response to customer needs and provide full life cycle support via online monitoring and diagnosing, product upgrading and continuous process improvement.

Do you have any questions?

Other Products

Scroll to Top